A “Wheely” Great Lawn Fawn Christmas Card!

When Lawn Fawn released their Revel Wheel set I knew that I had to make Christmas cards with it.  With some great Lawn Fawn papers and my Copics, here is what I designed.

I decided to make an A7 sized card because I wanted to have more background showing.  I used the Snowy Owl paper from Lawn Fawn Perfectly Plaid Chill collection as my bottom layer.  I really like the turquoise color for an icy themed card.  I chose the diagonal side as I think it really adds some “kick”.

Time to make the wheel!  I used the Lawn Fawn YouTube video to put together the basic wheel unit.  Check it out here.  I used the Reveal Wheel die set and cut Neenah Royal Sundance Bright White cardstock for all the basic pieces.  This is a great cardstock that has a nice linen finish for a bit of texture.  I used the oval cut out from the Reveal Wheel Square Add-On to make the opening on the front as well as cutting the oval frame in the set from dark turquoise cardstock.  Following the instruction in the video I attached the wheel unit to the back panel and used the front panel to mark the places for the sentiments on the wheel.  I used the Reveal Wheel Holiday Sentiments for that.  I then used partial sentiments from both the Merry Messages and Simply Winter Sentiments sets to stamp above and below the opening.  My Tim Holtz stamp positioner is a great tool to do this, especially since I used parts of two different sentiments.  I also used the Winter Sentiments set to stamp the greeting on the envelope.  Once I properly placed the stamped wheel I used a double layer of 3M foam tape to attach the front white panel to the back white panel avoiding the areas near the wheel.

I then set to decorating the front.  First, using the Stitched Hillside Borders I cut a panel for the bottom using Pixie Dust Sparkle Cardstock.  I also cut the snowflake from the Reveal Wheel Snowflake Add-On and two smaller snowflakes from a Karen Burniston set to cut some snowflakes from the same sparkle cardstock.  I pulled out my Toboggan Together set and stamped the deer with black Tsukineko Memento ink and the tree with Tsukineko Olympia Green VersaFine ink.  I colored the deer with Copic markers and cut both pieces out with the matching dies.  I used a white gel pen to add some details to the deer and a black glaze pen for his eye.  I attached the tree directly to the card and attached the deer with some 3M foam tape.  Then I put a red nose on Rudolph with a red jewel and yellow, blue, red and lavender jewels on the tree.  I added the 3 snowflakes with liquid glue.

Before placing the wheel unit on the front I decided that I needed a bit of something between them.  So I die cut a large Sue Wilson dotted oval from vellum and placed it behind the wheel unit.  I attached the main wheel unit to the front of the card using a single layer of 3M foam tape to give it a bit of room for turning the wheel.  Then I cut the little arrow from the Reveal Wheel die set and the same dark turquoise cardstock as the oval frame and attached that beside the wheel.

I love how you can change the sentiment on this card by just turning the wheel!  There are so many uses for this die set for any time of the year.  Here are the 4 different ones I used for this card.

  

 

Hope you enjoyed my Christmas card.  I had a “wheely, wheely” good time making it!  May all your Christmas crafting be wonderful.

Have a Drink on Your Birthday – MFT Style

As many of you know I have a small business where I sell my creations at craft shows and in my local community.  About every 6 months or so I look through my inventory and see what I need to add to it.  This time I noticed that I needed some birthday card for women, but instead of the same old flowers, etc. I wanted something a bit edgier.  So I turned to My Favorite Things and their martini and margarita stamps and dies.  They also come with shaker components and that really gave me a few ideas.  Here is the end result and I will go through the steps and information in a bit.

Originally I was going to try to do a different color for the martini, such as Cosmopolitan, but I liked the bright, happy green so much I that thought it could just be an Appletini instead.  So except for the glasses and the inside sentiments both are made the same.

This A6 sized card allows enough room for the divided front.  The left third of the front is cut from the Lawn Fawn Spring Perfect Plaid Lily of the Valley.  The right two thirds is a pale gray cardstock with darker fibers in it.  I used the Creative Expressions Ocean Waves Pinpoint embossing folder to add texture.  I found that if I turned it sideways it looked like bubbles coming up through liquid, which I thought worked well with the theme.  I actually cut both papers a bit larger than I needed, taped them together on the back and then cut it down to size and put them through my Xyron.  I attached a lime green glitter ribbon that I got from Michael’s and then attached to the front of the card.

A couple of hints:  First, when I want to “wrap” a ribbon around a card front I often find that I can’t get it tight enough.  The easy way is to cut a piece of ribbon about 2.5 times the length of the place you want it.  Then tie the 2 ends together into a square knot and then cut the loop made in the ribbon in half.  Use some glue or a Glue Dot to attach the knot to the place you want it and wrap each long end of the ribbon around the back of the layer and tape down (or stick to the Xyron glue backing.  You now have a ribbon that is snug around the layer!  I always stick a piece of double sided tape on top of the ends of the ribbon on the back for extra adhesion.  Second hint…..To help my wallet I always hit Michael’s after Christmas sale for their ribbon.  It’s usually on sale for at least 50% off, but a bit later it usually get even less.  I stock up during those sales.

I decided to add the front sentiment in a north-south direction for some interest.  Using the Spirited Sentiments stamp set from My Favorite Things I stamped the “Cheers to your Birthday” onto black strips of cardstock using Tsukineko VersaMark ink and heat embossed with white embossing powder.  I cut the ends into flags and attached to the front using 3M foam tape.

 

Both the martini and margarita glasses are made in the same way using the Martini Shaker Window and Frame and the Margarita Shaker Window and Frame sets from My Favorite Things.  Also used were the coordinating shaker pouches and acrylic ice cubes also from My Favorite Things.

First I cut two each of the martini and margarita frames from white 100# cardstock for a little more strength.  I sprayed one each with Tsukineko Shimmer Spritz in Sparkle and let dry.  I then put 1/8″ Sookwang tape on both side of the flange of the shaker pouches.  I removed the paper from the tape on the top side of the flange and placed the sprayed frames over the pouches and pressed into place.  I then filled the pouches with several “ice cubes”, lime green sequins and some clear micro beads for “bubbles”.  After removing the paper off the adhesive on the back of the pouch I attached a piece of transparency to the back.  Not only does this make the shaker easier to work with but it also makes the shaker look more like a glass.

Now for the beverages in the glasses.  Originally I was going to use the lime colored YG23 Copic marker to color in an area for the beverage.  However after I tried that I found that it wasn’t quite dark enough.  So I took a piece of vellum and colored it with the YG23 marker and let it dry.  I then attached the vellum to the back using Ranger Multi Medium Matte.  Make sure to drop the vellum edge down a bit from the top of the shaker to make it look like the top edge of the beverage.  Once the glue is dry trim the vellum around the edge of the shaker pouch.  Then attach the second frame to the back aligning all the edges with the front frame.  I used Art Expressions glitter glue clear as I find that it does give me a bit of adjustment time, but still sticks quickly.  I then put thin strips of 3M foam tape on the back around the edges, down the stem and on the base of the frame and attached it to the front of the card.

I felt it still needed a touch of something else, so I pulled out the My Favorite Things Martini Time stamp and die set.  Although they were a bit small I used the olive and lime wedge without the words.  I stamped the olive with Tim Holtz Distress Oxide ink in Peeled Paint.  I then used Copic R46 to color the pimento and Copic E18 for the toothpick.  I stamped the lime with Distress Oxide Twisted Citron and darkened the rind with Copic YG23.  I cut them out with the matching dies and attached with Glue Dots.  I stamped the envelope and insides with stamps from the Spirited Sentiments set.

I really think that my customers are going to love these cards!  I live in a 55+ community and they are always looking for something different for their friends.  Hope you liked them as well!  Make sure to leave a comment and follow my blog to see what’s next.

A Lawn Fawn Christmas in July

Each year my daughter commissions me to make her Christmas cards to send to her friends.  This year the requested theme was dinosaurs, and 28 of them.  Hmmm……well I had a general idea but needed to find the stamps.  So I turned to Lawn Fawn.

Now then……..how many Lawn Fawn sets does it take to make a dino Christmas card??  In my case apparently a LOT!  Here are the final choices:

Please note that the stitched rectangle sets are from My Favorite Things, but only because I have those.  Lawn Fawn does have stitched rectangles that you can use instead.

I started out by cutting a slightly smaller than A2 size rectangle out of red cardstock and also a slightly smaller one out of white smooth cardstock.  I stamped the snowfall stamp from Snowy Backdrops onto the white rectangle with Versamark ink and embossed with white embossing powder.  Then using Ranger Distress Oxide inks I blended the sky.  First I applied Broken China and then edged with Mermaid Lagoon.  After wiping the ink off the white embossing with a dry cloth I sprayed the Oxide inks to give it some texture.

Using the Stitched Hillside Border die I cut a snow drift from white textured cardstock and attached to the background.  Then that layer was put on the red layer and then onto a 4.25″ x 5.5″ white card base.  Then I took a clear Spectrum Noir sparkle pen and went over the snowy hillside to give it lots of sparkle.

Now comes the fun part!  I stamped all the scene pieces that I needed and colored them with Copic markers and then die cut them out.  Here is a list a it’s easier for you to see them this way.

1. BAAH Humbug Stamp & Die Set – Stamp, color and cut the little Santa hat.  I used Wink of Stella clear on the “fur” parts of the hat

2. Cheery Christmas Stamp & Die Set – Stamp, color and cut the little ornament and star.  Stamp the tree using a dark green ink and cut out.  I used VersaFine Olympia Green.

3. Critters From The Past Stamp & Die Set – Stamp, color and cut the baby dino in the egg.  Used a black glaze pen on the eye.

4. Rawr Stamp & Die Set – Stamp, color and cut the Dino and Rawr speech bubble.  Used a black glaze pen on the eye.

5. Snow Cool Stamp Set – Stamp the small dot on the egg using Wilted Violet Distress Oxide Ink.

And here is the result!  Think I might just need a Scan N Cut???

First I glued the star to the top of the tree.  Then using a craft knife I cut a slot along the large dino’s arm and tucked the top of the ornament in so it looks like he is holding it and glued the Santa hat to his head.  Then, using foam tape, I attached all pieces to the front of the card.  As a final touch I used Diamond Glaze on the ornament the dino is holding and Tonic Nuvo Gloss Drops in red, yellow, blue and green on the tree.

For the inside I went to the Rawr set and used the “Rawr means” and “in Dinosaur” and combined them with “Merry Christmas and a Happy New Year” from Merry Messages and “Happy Hanukkah” from Love You A Latke.

For the envelope I stamped the baby dino from Critters From The Past and the Rawr speech bubble from Rawr…..and you have a great holiday card and envelope set.

Hope you like my first Christmas card of the year.  I hope to have more to come and who know how many stamps and I dies I will use the next time!  Maybe more, maybe less but be sure to come back and see.

 

 

Happy Anniversary Card with Karen Burniston!!

This past Monday, June 4th, celebrated the second anniversary of my beautiful daughter Karen and her lucky hubby Will.  Time to make a special card for them.  If you have followed my blog you know that they “identify” with critters.  Karen likes sheep, squirrels, t-rex, and dragons.  Will goes with t-rex and foxes as he went to Marist College and their mascot is a fox.  So I always try to incorporate this into their cards.  Several purchases of new products gave me the following idea.  Somehow I always end up with a bunch of stuff on my desk and this project was no different.

First I had to decide which of my new Karen Burniston dies I wanted to use.  I was torn between the Tag Book Pop-up and the Twist Panel Pop-up but settled for my favored one, the Tag Book Pop-up.  Following Karen B.’s instruction video (some of the best I have ever seen, by the way), I cut the tag covers and hinge from white pearlized Bazzill cardstock.  I had some scraps of silver and white swirled cardstock and cut out two larger beaded frames, 2 smaller beaded frames and some trim pieces all included in the die set.  I put together the 2 tags and hinge and then sat there staring at it.  I knew I wanted to use a more “sedate” patterned paper for the inside but didn’t have anything that made me say…Oooh, that’s perfect.  I had a request from the “bride” to use both wedding colors for cards for both of them…..Eggplant and Navy Blue.  Purple and blue?  Blue and purple?  I couldn’t find anything with those colors that worked for my vision.  Then I had one of those lightbulb moments.  I had purchased one of Concord & 9th turnabout stamps.  If you haven’t seen them, I urge you to go to one of Jennifer McGuire’s videos using them and take a look.  You can pretty much make any patterned paper that you need with up to 4 colors of inks/embossing powders.  You need to make a base turnabout template to attach your paper in your favorite stamp positioner tool and then turn it 4 different directions using a different ink each time.  Here is mine sitting in my Tim Holtz Stamping Platform.  Following the directions from both Jennifer and Concord & 9th, I made one from 100# smooth white cardstock, numbered each of the sections and then laminated in my Xyron.  I then just use double sided tape to attach the cardstock to the template.

I pulled out the Concord & 9th Polka Dot Turnabout stamp along with a light and dark purple and light and dark blue Tsukineko Memento ink pads and stamped two 6″x6″ pieces of cardstock using a different ink color each turn.

I finally had the inside paper that I needed, so I cut the inside pieces for my tag book card.  I also used the left over patterned paper scraps to cut both the large and small hole reinforcements.  Once I attached the inside I decided that I wasn’t fond of the plain white showing at the reinforcement area on the inside, so I used the outside tag die to cut pieces that would fill in beside the patterned paper.  I covered the seams with some of the white/silver chain die cuts.

For the outside I die cut one of the rectangle frames out of purple pearlized Bazzill cardstock and glued it to left of the large tag.  I cut some green leaves using the Flowers and Bee die set and attached them.  I layered some open petal flowers with one layer purple and one layer blue.  I attached the flowers and put a pearl in the center.  I cut the word Celebrate from Word Set 2 three times out of white and once out of purple and stacked them and glued to the front.  I attached a couple hearts cut from red metallic cardstock.  I put a piece of purple ribbon on the front and blue ribbon on the back.

On to decorating the inside!  For support on the arms I put blue cardstock topped with strips of silver/white chain trim.  I die cut the individual small tags out of the purple pearlized Bazzill cardstock.  I used the Woodland Animals set to make a squirrel and fox.  I die cut the champagne glasses charm from the Wedding Charms retired set 4 times and stacked them up and clipped off the loop.  Using Copic markers I colored the glass to look like champagne.  I cut out the word “Happy” from Word Set 2 and the “2” and “nd” from the Numbers set in Bazzill pearl white cardstock.  I cut two hearts from red metallic cardstock.  I attached the silver and white frames on the smaller tag pop ups.  On the first box I put the champagne glasses with several gold glitter Nuvo Drops for bubbles, on the second box went the squirrel holding a heart, the third box the fox holding a heart, and the last panel has “Happy 2nd”.  For the finishing touch I added white crochet thread with silver threads through it and tied in bows.

The final full view of the inside ……………………

I hope you enjoyed my latest creation.  Sorry it has been awhile, but I’m just coming off major surgery so it has taken me awhile to get my mojo back.

Adapting A Die For A New Design!

Wow!  I can’t believe it’s been over a year since I convinced my daughter to help me start my blog.  I know I haven’t done as many posts as I had hoped thanks to health issues, but hopefully 2018 will be better for me and I can really get going on it.  In the meantime I hope you enjoy my newest discovery on how to adapt a die set for a whole new look!

In an earlier post my daughter showed all of you some of the designs that I have made for her and her hubby.  This year she decided to throw me a curve ball and tell me what she would like to see.  She wanted to have cards featuring T-Rex on each that when put together would look like they were interacting, such as hugging.  I said something like “HUH???” but told her I would see what I could do to engineer something.  I spent a couple of months scratching my head and wondering how I could make this come to life for her.  In the mean time I had placed an order for some of the new Karen Burniston dies from KB Riley LLC.  When they arrived I discovered I had my answer in the Katherine Label Pop-Up Die set!

First, I always make their cards with matching fronts.  Below you will see that I first layered on aqua Bazzill cardstock on A2 cards and then cut some of Lawn Fawn’s Snowshoe Hare printed cardstock to layer on that.  I added a strip of the same Bazzill cardstock vertically down the center of each and topped with a glittery aqua ribbon from my stash.  I cut the larger label from the Katherine die set out of the aqua Bazzill cardstock.  On some white cardstock I stamped the sentiment from Creative Expressions Christmas Sayings stamp set and then cut it out using the dotted label die from the Katherine die set.  I stacked and glued together the 2 labels and then attached using foam tape for dimension.  Then I added a snowflake with a glitter dot in the center.  Here are both fronts.

(c) Nancy Roth

Now comes the fun part!  I discovered that if you make two cards on the inside following Karen Burniston’s video for the Katherine die…………and here is the magical trick…………..and turn one of them upside down, you can make the pop-up parts come towards one another!  One will raise up and the other will drop down, so you have to do some calculating as to where you need to attach the mechanism.  I found that by putting the “box” part of the mechanism in the exact center of each of the A2 cards it should work perfectly.  I put Sookwang tape on all the necessary parts, measured where I needed to attach the box and then attached the “triangle” part where needed and then attached the “box” using the instructions in the video.  Here is the Boy (regular) version and Girl (upside down) version.  You can see where the mechanisms are opposite each other.

(c) Nancy Roth

(c) Nancy Roth

Both sides of the inside were lined with the same Lawn Fawn cardstock as the front.  The T-Rex is from Lawn Fawn Critters From The Past stamped with Memento black ink and colored with Copic markers.  I used My Favorite Things Mirror Image stamp to stamp one T-Rex so it could face the other.  I die cut the one direct stamped image and I used a technique by Jennifer McGuire to die cut the mirror image.  Hint……I used the Tim Holtz Stamping Platform to allow me to stamp on the mirror image stamp several times to get a better image.  I accessorized them with a Santa hat, bow and a present from Lawn Fawn stamp and die sets.  I then cut the dotted label from the Katherine set from white cardstock twice and Bazzill aqua cardstock once.  I used one of the white labels to cut a “snowbank” and attached it to the aqua label.  I then cut off some of the outside edge of the labels to make them fit together better when opened and attached the T-rex and a snowflake with a glitter dot.

To attach the T-Rex labels correctly you will need to put the 2 cards side by side and decide where to place them.  I actually overlapped the cards as far as they would go and used two paper clips to hold them in place while I decided where the T-Rex labels needed to go.  Unfortunately I couldn’t make them hug…..after all, they are T-Rex with little short arms!  But I was able to make their noses almost touch.

(c) Nancy Roth

Once those were placed I finished off the cards.  I cut a snowbank using the Lawn Fawn Stitched Hillside Borders and attached along the 3 straight edges to allow a gift card to be inserted.  I also cut two snowflake garlands from the Elizabeth Craft Designs Holiday Garlands 2 die set and attached along the top.  I added glitter dots to the centers of the snowflakes for some shine.  Lastly I stamped and added the second white label to the card for a sentiment and signature area.  And here is the final set!  One final note……..since the levels of the pop-up mechanisms are dependent on how far the card is opened, you might have to experiment a bit when you set them up together as to the angles of the cards.  But with a little judicial prodding you can get them where you want them.

(c) Nancy Roth

I hope you enjoy my creation!  Remember that you can try something different by looking at your stamp and dies sets in a whole different perspective.  It’s amazing what you can create when you think outside the box.  Have a healthy, safe and wonderful New Year!!